Modular filtration system consists of filtration modules, cleaning and regeneration system and of a control module mounted on a frame. 100% ready for use.
Perfectly suitable for filtering mechanical impurities in flammable or explosive liquids at high temperatures.
Productivity (general m3 / hour) 15–500
Productivity (per 1 module) up to 40
Module number in 1 block 3–24
Filtration type Continuous, maintenance-free
Filtering range 25–100 µм for BT-F1, 1–50 µм for BT-F2,3
Filtration fineness 1–100 µм
Contaminated contents under 300 ppm
Filter area 3–200 m2
Single module filter area from 1 m2
Typical working pressure 0,6 /1,0/ 1,6/ 2,5/ 4,0 MPa
Pressure point where filter regeneration is still possible 0,3 MPa and more for BT-F1, non-existing for BT-F2,3
Pressure loss 0,02–0,1 MPa
Max. pressure difference 0,1 MPa
Max. working temperature 350°C (defined by seals)
Possible liquid viscosity under 30 cSt for BT-F1, under 20 cSt for BT-F2,3
Dn of modules entry / exit ball valve Dn 50–150 mm
Drain valve Dn 50–150 mm
Weight 5000 – 18000 kg for BT-F 1 – 3
Mounting position before pump (BT-F1), before or after pump (BT-F2,3)
Climatic version NF
Danger class GOST 10.1007-76 4
Explosive class GOST 3085211-2002 llB- T3
Fire class GOST 12.1044-89 ЛВЖ, ГГ (LVJ, GG)
Dimensions (L х W х H) max. 14х3х3 m for BT-F 1 – 3
Steps number (filtration modules number per 1 block) 1-2/2-6/3-2
Main connector type for entry / exit Flange
Main connector standard for entry / exit According to GOST 33259-2015 (compatible with DIN, ANSI 16.5)
Type and material for 25–150 µм filter cartridge:
Filter cartridge mounting type Threaded, flanged, clamping
Boody material AISI 304/304L/321/316Ti/316L (or same quality local steel)
Gasket material According to technical inquiry
Drive type Pneumatic ball valve (IP 65 protection class)
Control system Siemens controller, 24V, IP 55, fuse protected
Remote monitoring GSM remote monitoring system
